Combination Rail Crossing
What We Do
DESIGN
An Omni engineer will evaluate and design a crossing for the application
MANUFACTURER
Omni manufactures all products at their McHenry, Il plant. Houston, Tx, Lincolnton, NC plants manufactuers concrete products.
WARRANTY
Omni Products exclusive warranty guarantees the railroad grade cossing will be free of manufacturing defects for six years.
Combination Rail Crossing IC/ECR
The Gauge Guard crossing system combines Omni’s Railguard™ rail seal with precast concrete panels in the gauge of the track. The railguard provides a positive flangeway impenetrable by snow, ice, sand, or other debris, and electrically isolates the rail. For the field side, Omni provides a single-component precast panel with the rubber rail permanently attached.
Combination Rail Crossing (IC/ECR) Specifications:
Cross-Section View
Panel Lengths:
- 9 feet
Panel Height:
- Accomdates 115# to 141# Rail
Gauge Panel Width:
- 43 1/2 inches
Field Panel Width:
- 27 inches (10-foot tie)
- 21 inches ( 9-foot tie)
Rubber Railseal Widths:
- 6 1/2 inches (Gauge)
- 6 3/4 inches (Field)
Rebar:
- ASTM A615 Gr.60 (Tied)
- ASTM A706 Gr.60 (Welded)
Steel Angle:
- ASTM A36
Concrete:
- Compressive Strength: 6000 p.s.i. Min.
- Entrained Air: 6.0% ± 1%
- Max. Water/Cement Ratio: 0.44%
- Salt Sealer: Co-Ma-Seal CM
Rubber Railseal:
- Type: Virgin SBR
- Tensile: 2,000 p.s.i.
- Hardness: 65 ± 5 Durometer Shore A
- Elongation: 400%
Fasteners:
- Timber Screws, 3/4″ x 12″
- Medium Carbon Steel.
- Tensile Strength 120,000 psi Min.
- Pullout Resistance +13,000 lbs